Hadley Style Eye Cup
The Hadley style eye piece is interchangeable on the Pedersoli Creedmoor sights models- USA 430, 431, 461, 465, 404, 405, 406, 407 and 446.
It has 8 viewing holes of different diameters:
(.012 /.020 /.031 /.039 /.051 /.063 /.078 /.086" ,
0,3 / 0,5 / 0,8 / 1 / 1,3 / 1,6 / 2 / 2,2 mm),
placed on a rotating disk, which can be selected without disassembling or loosing the eye piece, following the available light.
The eye piece has a rubber ring to avoid any inconveniences due to recoil.
Silhouette Creedmoor Sight
Silhouette Creedmoor sight
High precision Creedmoor sight adjustable for elevation and with double adjustment for windage at the base and on the eyepiece for an exact setting.
Adjustable for different tang angles.
Distance between the two mounting holes: 23/16” up to 25/16” (56 up to 58,2 mm). With 3” (76 mm) elevation.
Available in -
Mid Range - 2" Staff
Long Range - 3" Staff
Lyman Peep Adjustable Rear Sight
Blued steel, with two eye disks, adaptor plate allows easily installation. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide.
The larger 5/8" diameter knurled eye disk is drilled with the smaller .040" aperture for use on bright days. The smaller 1/2" diameter knurled disk is drilled with a larger .093" aperture for large field of view and quick target acquisition on cloudy days. Made in the U.S.A. by Lyman, this sight is a favorite of target shooters. Both large and small eye disks are included (small disk shown). A third choice is to use this sight with no eye disk installed, for quick sighting in dark woods or dark days.
RS-57-SML, suits Lyman Trade Rifles, Thomson Center, Deerstalker etc
RS-57-GPR, suits Lyman Great Plains
Soule Creedmoor Sight
Soule Creedmoor Sight
Priced from $330.00
The Soule tang sight is the world-wide choice of both target shooters and hunters.
High precision Creedmoor sights adjustable for elevation.
One full turn of the windage knob changes the left or right aim point by 2.5 minutes of angle (in ½ minute increments). Quick and accurate return to center or previous setting is another big advantage. Ample windage movement for any shooting conditions.
Distance between the two mounting holes: 2 3/16” up to 2 5/16” (56 up to 58,2 mm). With 2” (50,8 mm) elevation.
Avaliable in -
Short Range - 2" Staff
Mid Range - 3" Staff
Long Range - 4" Staff
Universal Creedmoor Sight
Universal Creedmoor sight
Tang sight adjustable in elevation and windage adjustment on the eye piece.
It is perfect for long distance target shooting both with muzzle loading and breech loading rifles.
Distance between the two mounting holes: 23/16” up to 25/16” (56 up to 58,2 mm). With 2" (50,8 mm) elevation.
Available in -
Mid Range 3" Staff
Long Range 4" Staff
"Goodwin Style” Creedmoor Tang Sight
"Goodwin Style” Creedmoor
This high precision Creedmoor sight with cylindrical staff off center to the axis of the barrel was popular with long range target shooters in the late 1800’s. Thanks to its “flag” position, the eye piece slide enables a very wide windage adjustment with a movement of 1.26” (32 mm), particularly useful in strong wind conditions.
The elevation adjustment has a movement of 2.85” (72 mm)
The structural features of the Goodwin Creedmoor sight offers the advantage to reach the rifle chamber with any cleaning device and to inspect the barrel between the shots. The sight base has a “tilt” screw which allows the staff to be set perfectly vertical at all elevations. Distance between the two mounting holes: - 2 3/16” up to 2 5/16”
(56 up to 58,2 mm).