Powder Trickler
Used to trickle that last few tenths of a grain of powder into a dropped and weighed charge for “0” variation. Ours has a wide, stable base, is easy to clean, and uses a small amount of powder to fill.
Hornady Powder Cop
Install on your progressive press after the powder drop station to automatically check dropped charges (a smart practice, often ignored). It won’t replace careful attention, but helps monitor the reloading process. Works with all powder types and calibres.
Hornady Rifle Micrometer Metering Insert
Used to trickle that last few tenths of a grain of powder into a dropped and weighed charge for “0” variation. Ours has a wide, stable base, is easy to clean, and uses a small amount of powder to fill.
Hornady Vibratory Trickler
Take powder trickling to a new level of accuracy and efficiency with the new Vibratory Trickler.
The Vibratory Trickler, powered by two AAA batteries, features variable settings to trickle all kinds of powders, ensuring the precise amount for each charge. Its modular design means you can use it with or without the base and also makes cleanup quick and easy.
Featuring:
Trickles all powders
Light-up LED screen
High, low, and variable trickle settings
Use in base or outside of base
Weighted for stability
No-slip base
Powder Measure Stand
The incredibly strong Fast-Load Powder Measure Stand has a rigid frame and extra long arm that lets you fill an entire 50-count Universal Loading Block. Accepts any measure with 7/8"-14 thread. Lock-N-Load Bushings: If you have more than one powder measure, you can switch them in and out of the Fast-Load stand in just seconds, using Lock-N-Load bushings. Long Reach: Lets you bench-mount the powder measure and still drop powder in the loading block.
Lock-N-Load Powder Measure
The Lock-N-Load powder measure offers the most flexible operation and the widest range of any powder measure. It ranges from .5 - 265 grains of powder (special metering inserts and rotor required). Metering inserts can be changed with the push of a button. Comes with standard rotor and metering insert only.
Features
Largest Charge Range in the Industry
Go from .5 grain to 265 grains by simply changing rotor and inserts. Use one Lock-N-Load Powder Measure for reloading everything from small pistol cartridges to large magnum rifle cartridges.
Push Button Release Function
To change metering inserts, just push the Lock-N-Load insert release button and insert another metering insert. Simply verify the new charge and you're reloading again right away. Inserts can be swapped in seconds. Go from reloading 30-06 to 45 Auto in no time. Keep the preset inserts with your die sets.
Precision Tolerance
With only .002" clearance between the drum and rotor, it's the tightest in the industry for a standard measure. This tight tolerance helps eliminate powder binding between the frame and drum, delivering smooth function with all types of propellant–extruded or ball.
Multiple Mounting Methods
Mount to your bench using a standard mounting bracket and lock ring, or use our Lock-N-Load bushings to mount this versatile measure on the Fast Load Powder Measure Stand or on the Lock-N-Load AP with case activated powder drop for automatic powder measuring during reloading.
Adjustable Tension
The O-ring on the metering insert adjustment lets you put a slight amount of tension on the metering unit to make fine, incremental adjustments. Once you've set your charge, tighten the lock ring to secure the setting.
Small & Large Drop Tubes
These tubes speed up powder flow. Two drop tubes are provided standard for .204 to 45 caliber loads. Use the largest drop tube that fits the case mouth. An optional extended drop tube is also available.
L-N-L Quick Trickle
For handloaders who want “hands-on” accurate control of their powder charges
An excellent way to deliver an initial large volume powder charge with the ability to finish with small precision metering for perfection.
This versatile powder trickler features hand operated high and low speeds with up to a three-to-one gear ratio.
Hornady Case Activated Powder Drop.
The new and improved Case Activated Powder Drop has been re-engineered with quick change-overs in mind. The retainer spring has been re-engineered for smoother function than previous models and the powder drop only dispenses a powder charge when a case is present. Works with the Lock-N-Load AP or other progressive presses that use 7/8" - 14 threads.
